Fig. 8.45 in Software

Generator qr barcode in Software Fig. 8.45

Downloaded from Digital Engineering Library @ McGraw-Hill (www.digitalengineeringlibrary.com) Copyright 2004 The McGraw-Hill Companies. All rights reserved. Any use is subject to the Terms of Use as given at the website.

Discussion:

Downloaded from Digital Engineering Library @ McGraw-Hill (www.digitalengineeringlibrary.com) Copyright 2004 The McGraw-Hill Companies. All rights reserved. Any use is subject to the Terms of Use as given at the website.

Answers: 3,5

void swap() { /* ... */ if(error) printf(_strerror("Error in swap."));

Open the image you want to adjust. Choose Enhance | Adjust Color | Adjust Color For Skin Tone to open the Adjust Color For Skin Tone dialog box. Click an area of the subject s skin. Photoshop Elements adjusts the colors based on the area you clicked. If you don t like the results, click another area. Alternatively, you can drag the Tan and Blush sliders to modify the subject s skin tone. If you re satisfied with the results, go to step 5. Drag the Temperature slider to change the color of the ambient light. Drag to the left to cool the image; drag to the right to warm the image. Click OK to apply the changes.

Cisco Secure Desktop (CSD) is a WebVPN enhancement that provides additional security to your WebVPN sessions upon logging in, during the session, and when ending the session. CSD is a stand-alone Java-based software package that provides additional protection to a WebVPN session (clientless or AnyConnect). CSD is supported on the following operating systems: Windows 2000, XP, and Vista (the latter in CSD 3.3), Mac OS X, and Linux.

Recall from 4 that a switch will flood three kinds of frames: broadcast, multicast, and unknown destination unicast frames. In the case of broadcast and multicast traffic, this can create serious performance issues with a layer 2 network that has loops. For example, imagine that PC-A in Figure 14-2 performs an ARP

Router# debug eigrp packets EIGRP Packets debugging is on (UPDATE, REQUEST, QUERY, REPLY, HELLO, IPXSAP, PROBE, ACK, STUB, SIAQUERY, SIAREPLY) EIGRP: pkt key id = 2, authentication mismatch EIGRP: Serial0/1: ignored packet from 192.168.1.2, opcode = 5 (invalid authentication) EIGRP: Dropping peer, invalid authentication EIGRP: Sending HELLO on Serial0/1 AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0 %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.1.2 (Serial0/1) is down: Auth failure

26.08.The CD contains a multimedia demonstration of using the show frame-relay map command on a router.

CounterNameSpace::counter ob;

This presents an interesting problem. Host-1 can ping the 2600-1. The 26001 can ping the 2600-2. Host-3 can ping the 2600-2. Therefore, on a hop-byhop basis, you have IP connectivity. And the 2600-2 can even ping Host-1, indicating that some routing functioning is working. 12. Access the 2600-1 router and examine its routing table. Fix the problem. At the top of the simulator in the menu bar, click the eRouters icon and choose 2600-1. Examine the routing table: show ip route. Does the 2600-1 know how to reach 192.168.3.0/24 It does not. The 2600-2 router could ping Host-1 since the 2600-1 router is directly connected to these segments, but any traffic from the 2600-1 to 192.168.3.0/24 will fail since the router doesn t have a path. Add a static route to 192.168.3.0/24: configure terminal, ip route 192.168.3.0 255.255.255.0 192.168.2.2, and end. Test connectivity to Host-3: ping 192.168.3.10. The ping should be successful. 13. Now test connectivity between Host-1 and Host-3. At the top of the simulator in the menu bar, click the eStations icon and choose Host-1. Test connectivity to Host-3: ping 192.168.3.10. The ping should be successful. You should now feel comfortable troubleshooting routers that are using static routes for routing. You should sharpen your basic IP troubleshooting skills for the exam, as demonstrated in this exercise.

( ex cos 2x + x 3 4x) dx = F ( 2) F ( 1) 24 1 sin( 2 2) + 2 22 2 4 14 1 sin( 2 1) + 2 12 2 4